eSun eSmooth 1.75mm 0.5kg Roll - Natural
0.5kg of eSUN eSmooth 3D printing filament comes vacuum sealed inside a cardboard box.
- Can be polished by using isopropyl alcohol
- Translucent, white appearance
- Non-toxic, tough, hard to break, good temperature resistance and creep resistance
- Good print precision, no warping, stripping or stringing
- Environmentally friendly, stable performance, more refined and brighter after polishing, complete decomposition, no carbonation and no residue in 600 ℃, can be used for metal casting.
Print Settings
- Best print temperature: 190-210℃
- Bed temperature: 45-55℃
- Feed rate: 30-90mm/s
- Idling speed: 90-150mm/s
Please note: eSmooth absorbs moisture easily, so it is recommend to dry before printing. Remember to choose an ethanol solution over 99.7% purity and work with a spray type polisher for polishing.
When polishing:
- Hang the prints in the air to make full contact with ethanol vapour. The whole process takes 20-30 minutes.
After polishing:
- The prints normally turn white and soft. Just use tweezers or other tools for air drying. Do not touch by bare hands.
- To achieve the best polishing effect, 3-5 days air drying will volatilise solvent on the surface and form a hardened layer. Do not dry with oven, or the solvent will volatilise and destroy the polishing effect.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
eSun eSmooth 1.75mm 0.5kg Roll - Natural
eSun eSmooth 1.75mm 0.5kg Roll - Natural
0.5kg of eSUN eSmooth 3D printing filament comes vacuum sealed inside a cardboard box.
- Can be polished by using isopropyl alcohol
- Translucent, white appearance
- Non-toxic, tough, hard to break, good temperature resistance and creep resistance
- Good print precision, no warping, stripping or stringing
- Environmentally friendly, stable performance, more refined and brighter after polishing, complete decomposition, no carbonation and no residue in 600 ℃, can be used for metal casting.
Print Settings
- Best print temperature: 190-210℃
- Bed temperature: 45-55℃
- Feed rate: 30-90mm/s
- Idling speed: 90-150mm/s
Please note: eSmooth absorbs moisture easily, so it is recommend to dry before printing. Remember to choose an ethanol solution over 99.7% purity and work with a spray type polisher for polishing.
When polishing:
- Hang the prints in the air to make full contact with ethanol vapour. The whole process takes 20-30 minutes.
After polishing:
- The prints normally turn white and soft. Just use tweezers or other tools for air drying. Do not touch by bare hands.
- To achieve the best polishing effect, 3-5 days air drying will volatilise solvent on the surface and form a hardened layer. Do not dry with oven, or the solvent will volatilise and destroy the polishing effect.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
0.5kg of eSUN eSmooth 3D printing filament comes vacuum sealed inside a cardboard box.
- Can be polished by using isopropyl alcohol
- Translucent, white appearance
- Non-toxic, tough, hard to break, good temperature resistance and creep resistance
- Good print precision, no warping, stripping or stringing
- Environmentally friendly, stable performance, more refined and brighter after polishing, complete decomposition, no carbonation and no residue in 600 ℃, can be used for metal casting.
Print Settings
- Best print temperature: 190-210℃
- Bed temperature: 45-55℃
- Feed rate: 30-90mm/s
- Idling speed: 90-150mm/s
Please note: eSmooth absorbs moisture easily, so it is recommend to dry before printing. Remember to choose an ethanol solution over 99.7% purity and work with a spray type polisher for polishing.
When polishing:
- Hang the prints in the air to make full contact with ethanol vapour. The whole process takes 20-30 minutes.
After polishing:
- The prints normally turn white and soft. Just use tweezers or other tools for air drying. Do not touch by bare hands.
- To achieve the best polishing effect, 3-5 days air drying will volatilise solvent on the surface and form a hardened layer. Do not dry with oven, or the solvent will volatilise and destroy the polishing effect.
